Version history
Transportation Department watchdog opens audit of how the FAA oversees aircraft suppliers
- Version 1Current
First published.
- Timeline added: The OIG last reported on how the FAA oversees aircraft makers' suppliers on 26 February 2008, in an assessment of the agency's risk-based system for that work.
- Timeline added: In January 2024 the cabin of a Boeing 737-9 suddenly lost pressure in flight after a mid-exit door plug came off, the OIG memo says. The National Transportation Safety Board (NTSB) investigated the incident.
- Timeline added: An earlier OIG report, dated 9 October 2024, found that FAA inspectors did not make sure suppliers carried out First Article Inspections. Those checks show whether a supplier can make parts that meet the design from the start.
- Timeline added: The Office of Inspector General (OIG) at the US Department of Transportation said on 20 November 2026 that it is starting an audit of how the Federal Aviation Administration (FAA) oversees aircraft makers and their suppliers.
- Confirmed: The watchdog started the audit on its own initiative, not at the request of Congress or the department. Its project number is 27A3003A000.
- Confirmed: In January 2024 the cabin of a Boeing 737-9 suddenly lost pressure in flight after a mid-exit door plug came off, the OIG memo says. The National Transportation Safety Board (NTSB) investigated the incident.
- Confirmed: According to the OIG memo, the NTSB found weaknesses in Boeing's quality assurance processes. It also found that FAA oversight of Boeing's work instructions for removing parts was not effective.
- Confirmed: An earlier OIG report, dated 9 October 2024, found that FAA inspectors did not make sure suppliers carried out First Article Inspections. Those checks show whether a supplier can make parts that meet the design from the start.
- Confirmed: The OIG says the FAA has recently changed how it assesses risk at manufacturers, started a new system to track its oversight, and plans to revise the model it uses to rate each manufacturer's risk. Those changes are one reason for the audit.
- Confirmed: Under FAA rules, a manufacturer must have a quality control system for its suppliers that the FAA has approved. Companies holding FAA production approvals must make sure supplied parts and services meet their requirements, and the FAA checks that they do.
- Confirmed: Auditors will work at FAA headquarters, at its regional offices and at other places they will pick during the audit. The memo is signed by Marshall E. Jackson, the OIG's Assistant Inspector General for Aviation Audits.
- Open question: Reuters reported that the plane in the January 2024 incident was an Alaska Airlines Boeing 737. The OIG pages we read do not name the airline.
- Source added: https://www.oig.dot.gov/sites/default/files/library-items/FAA%20Oversight%20of%20Aircraft%20Manufacturers%20and%20Suppliers%20Announcement%20Letter%2011-20-26.pdf (U.S. Department of Transportation Office of Inspector General)
- Source added: Audit Initiated of FAA’s Oversight of Aircraft Manufacturers and Suppliers | DOT OIG (U.S. Department of Transportation Office of Inspector General)
- Source added: Reuters: Transportation Department watchdog opens audit of FAA oversight of aircraft suppliers (Reuters)